Fluke 125/003 Digital Industrial Scopemeter, 40 Mhz Bandwidth, 8.75Ns Rise Time is a part of Scope Of Electrical Engineering products library. To see this Fluke 125/003 Digital Industrial Scopemeter, 40 Mhz Bandwidth, 8.75Ns Rise Time in stock for product, click the link above and come over and then you will get this item about Fluke 125/003 Digital Industrial Scopemeter, 40 Mhz Bandwidth, 8.75Ns Rise Time .
This specific product of Fluke 125/003 Digital Industrial Scopemeter, 40 Mhz Bandwidth, 8.75Ns Rise Time posted by Monahan. You can see a library of Scope Of Electrical Engineering. Get segments interesting article about Scope Of Electrical Engineering that may help you. If you are attempting to find Fluke 125/003 Digital Industrial Scopemeter, 40 Mhz Bandwidth, 8.75Ns Rise Time with the simplest value. $ead the review on Fluke 125/003 Digital Industrial Scopemeter, 40 Mhz Bandwidth, 8.75Ns Rise Time, it's reasonable price. Thanks for your visit Cheap Small Appliances Online.
The Fluke ScopeMeter 125 is a handheld electrical test device that combines a 40MHz, two-channel digital oscilloscope for viewing electrical signals with a true RMS, manual- and auto-ranging digital multimeter on each input for measuring AC and DC voltage to 1,250V, frequency to 70MHz, current to 400 amp, resistance to 30MΩ, capacitance to 500μF, rotational speed to 50kRPM, and duty cycle from 2% to 98%. The oscilloscope has a real-time sample rate of 25MS/s and a record length of 512 points per channel for acquiring waveforms. Cursor and automatic measurement parameters allow an in-depth analysis of waveforms, and edge and video triggers allow isolation of specific signals. The oscilloscope's advanced automatic triggering recognizes signal patterns and automatically optimizes triggering, timebase and amplitude settings. It has an optical port for attaching a Fluke ITP120 probe (sold separately) for external triggering. To aid debugging, the bus health mode validates the quality of electrical signals on industrial buses and networks. The 5,000-count, true RMS (root mean square) multimeter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. The meter can measure power for single phase and balanced three-phase systems, displaying the total power (watts), apparent power (VA), reactive power (VAR), and the power factor (PF) to determine how efficiently an installation uses power. In the harmonics mode, it graphs harmonics to the 33rd order to determine the quality of power. The relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, the touch-hold mode captures a stable reading, and the data-hold function freezes a reading on the display to aid documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s diodes are working properly. Up to 20 setups and screen shots can be stored in the internal memory. A TrendPlot chart recorder graphs readings from both the oscilloscope and multimeter functions of the minimum and maximum values over time. It can be programmed from 15 seconds per division over 120 seconds to 2 days per division over 16 days. Additional specifications include a rise time of 8.75ns and various triggering features. The unit has a 2.83" monochrome LCD with a resolution of 240 x 240 pixels for viewing waveforms and measurements, and a backlight for visibility in low light. A multimeter is an electrical testing tool for measuring multiple properties of an electrical circuit to verify proper operation or diagnose problems.
The unit has an optically isolated RS-232 interface for connecting to a compatible printer for direct printing of data or to a PC for data storage. It operates on a rechargeable NiMH battery pack or a 120V, 60Hz AC adapter/charger (both included). When operating on battery power, it automatically shuts down after 30 minutes of non-use to conserve battery life and has a low-battery indicator that signals when the battery needs recharging. It meets European Standard (EN) and International Electrotechnical Commission (IEC) 61010-1:2001, American National Standards Institute and International Society of Automation (ANSI/ISA) S82.02.01, CAN/CSA (Canadian Standards Association) C22.2 61010-1-04, and UL (Underwriters Laboratories) 61010-1-04 safety standards, and is rated for CAT (category) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It has CE (European Conformity) marking. It comes with a 40MHz high-impedance voltage probe, an AC current clamp, a set of test leads with mini clips and alligator clips, a BNC-to-banana adapter, a rechargeable NiMH battery pack (installed), an AC adapter/battery charger, and a user manual. The Fluke ScopeMeter 125 is available with and without the SCC120 kit. The kit includes FlukeView CD-ROM software for storing and analyzing data, a USB cable for connecting to a PC, and a hard carrying case for storing the unit and its accessories. The software is compatible with Microsoft Windows 2000 and beyond operating systems.
|Display||2.83" monochrome LCD|
|Real-time sample rate||25MS/s|
|Record length||512 points per channel|
|Maximum DC voltage measured||1,250V|
|Maximum AC and AC/DC voltage measured||1,250V true RMS|
|Maximum current measured||400 amp (with included clamp)|
|Maximum resistance measured||30MΩ|
|Maximum capacitance measured||500μF|
|Installation rating||CAT III, 600V|
|Standards met||EN and IEC 61010-1:2001, ANSI/ISA S82.02.01, CAN/CSA C22.2 61010-1-04 and UL 61010-1-04 safety standards; CE marking|
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Oscilloscopes are electrical testing devices used to verify the functionality of equipment that generates an electrical signal. Oscilloscopes measure the voltage of an electrical signal over time, and display the measurement as a waveform in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and the time on a horizontal (X) axis. Details of a waveform demonstrate the signal over time. Most oscilloscopes have two or four channels for inputting a signal. Some digital oscilloscopes offer more than four channels, allowing channels to be dedicated to specific signals and applications. Bandwidth is the maximum frequency of a signal that an oscilloscope can capture. A constant image will display if a signal is shown at a high frequency. Oscilloscopes may be analog, digital, or mixed signal. An analog oscilloscope directly displays an input signal as a continuous waveform, typically in a luminous phosphor on a cathode ray tube (CRT). A digital oscilloscope converts the input signal into a digital format and reassembles the waveform for display, typically on an LCD. A mixed signal oscilloscope (MSO) displays both analog and digital formats. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. They may provide real-time intensity grading, and may have the ability to adjust frequency of display. Oscilloscopes can be powered with batteries or electricity, or may have a built-in generator. They are commonly used for testing, measuring, and inspecting in science, engineering, telecommunications, automotive, and electronics applications.
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
What's in the Box?
- Fluke ScopeMeter 125 handheld oscilloscope/multimeter
- 40MHz high-impedance voltage probe
- AC current clamp
- Set of test leads with mini clips and alligator clips
- BNC-to-banana adapter
- Rechargeable NiMH battery pack (installed)
- AC adapter/battery charger
- User manual
- SCC120 kit (for model with kit)
- FlukeView software
- USB cable
- Hard carrying case
- Handheld unit combines a 40MHz, two-channel digital oscilloscope for viewing electrical signals with a digital multimeter for measuring voltage, current, resistance, capacitance, frequency, rotational speed, duty cycle, and power
- The oscilloscope's real-time sample rate is 25MS/s and record length is 512 points per channel for acquiring waveforms
- True RMS multimeter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
- 2.83" monochrome LCD with a backlight for visibility in low light
- Meets EN safety standard 61010-1 and is rated for CAT III installations to 600V
Top Small Appliances Store is your one-stop shop for all of your small kitchen appliance needs. People have been buying small appliances and major appliances online for years, so the process has become incredibly streamlined.
Life's so much easier when you have small appliances around - Fluke 125/003 Digital Industrial Scopemeter, 40 Mhz Bandwidth, 8.75Ns Rise Time. Small appliances, like microwaves, toasters, toaster ovens, juicers, blenders, breadmakers, espresso machines, and coffee makers, as well as other specialty small appliances, like popcorn machines, cotton candy machines, and ice cream machines, are all made to help you prepare the best meals in a minimal amount of time.
You can find the perfect small appliance for your home at http://www.supersxoo.ddns.info.